Heterocyclic Building Blocks-Cinnoline

875-66-1, Cinnolin-4-ol is a cinnoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

a. [4-CHLOROCINNOLINE] (9b). A mixture of 4-hydroxycinnoline (2.0 g, 13.7 mmol), phosphorus oxychloride (1.94 mL, 20.5 mmol), and pyridine (0.33 mL, 4.1 mmol) in [CHLOROBENZENE] (50 mL) was refluxed for 1 hour. Then the mixture was cooled and the solvent evaporated under vacuum, water was added, and the mixture was neutralized with solid sodium bicarbonate and extracted with chloroform (3 x 100 mL), washed with water (3 x 100 mL), dried [(MGS04)] and evaporated under vacuum, giving 1.84 g, in 82 % yield; [MP] [76-77 C] (lit mp 78 [C)] [; IH] NMR [(CDC13)] [8] 7.91 (m, 2H), 8.20 (dd, 1H, [J=6.] 2, [J=2.] 1), 8.57 (dd, 1H, J=6. 6, J=1. 8), 9.34 (s, [1H)] ; [13C NMR (CDCL3) No. ] 123.0, 124.9, 130.2, 131.6, 132.3, 133.8, 134.9, 144.4.

As the paragraph descriping shows that 875-66-1 is playing an increasingly important role.

Reference£º
Patent; RUTGERS, THE STATE UNIVERSITY; LAVOIE, Edmond, J.; RUCHELMAN, Alexander, L.; LIU, Leroy, F.; WO2004/14906; (2004); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

78593-33-6, 3-Bromocinnoline is a cinnoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%.

78593-33-6 3-Bromocinnoline 12678051, acinnoline compound, is more and more widely used in various.

Reference£º
Patent; Sanofi; US5017579; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.21905-86-2,Cinnoline-4-carboxylic acid,as a common compound, the synthetic route is as follows.

EXAMPLE 5 n-Propyl Cinnoline-4-carboxylate (5) A suspension of 870 mg of 1, and 850 mg of carbonyidimidazole (CDII) in 30 ml of tetrahydrofuran (THF) was stirred at room temperature until CO2 evolution ceased (ca. 30 minutes). After being stirred for 2 hours, the resulting mixture was treated with 320 mg of dry nypropanol and 3 drops of a 0.1 M solution of sodium imidazole in THE. The mixture was held at room temperature overnight, then the solvent was evaporated and the residue was partitioned between water and ether. The etheral extract was washed with saturated sodium bicarbonate solution, then with brine, then dried (MgSO4) and stripped in a rotary evaporator. The residue was chromatographed over silica gel, using a 1:1 v:v mixture of cyclohexane and ethyl acetate as eluent, to give 5, as a yellow oil.

As the paragraph descriping shows that 21905-86-2 is playing an increasingly important role.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.38024-35-0,4-Aminocinnoline-3-carboxamide,as a common compound, the synthetic route is as follows.

To a suspension of 4-aminocinnoline-3-carboxamide (3.5 g, 18.60 mmol) in DCM (10 ml) was added POCI3 (43.3 ml, 465 mmol) followed by triethylamine (7.78 ml, 55.8 mmol). The mixture was refluxed for 7 h. The reaction was then allowed to cool to 11 and conc, in vacuo. The crude residuewas then carefully treated with saturated aqueous NaHCO3 at 0 C. A precipitate formed which was collected via vacuum filtration. The filter cake washed with water (-i00 ml,), collected, and driedvacuo to provide the title compound as a grey solid 4-aminocinnoiine-3-carbonitriie.

38024-35-0 4-Aminocinnoline-3-carboxamide 2814562, acinnoline compound, is more and more widely used in various.

Reference£º
Patent; PI INDUSTRIES LTD.; SAXENA, Rohit; PANMAND, Deepak Shankar; JENA, Lalit Kumar; SRIVASTAVA, Khushboo; RAJU, Jella Rama; MANJUNATHA, Sulur G; SAMANTA, Jatin; GARG, Ruchi; AUTKAR, Santosh Shridhar; VENKATESHA, Hagalavadi M; GADAKH, Ramdas Balu; KLAUSENER, Alexander G. M.; POSCHARNY, Konstantin; (219 pag.)WO2018/116072; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

21905-86-2, Cinnoline-4-carboxylic acid is a cinnoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 2 Potassium Cinnoline-4-carboxylate (2) 5.10 g of (1) was added over 30 minutes to a vigorously stirred solution of 2.02 g of potassium carbonate in 25 ml of water, at room temperature. The resulting mixture was stirred for one hour at room temperature, then treated with charcoal, and after filtration the water was evaporated. The residue was azeotropically distilled with toluene and dried at 70 C. under reduced pressure, to give 2, as a light tan powder, m.p.: above 280 C.

21905-86-2 Cinnoline-4-carboxylic acid 89099, acinnoline compound, is more and more widely used in various.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.21905-86-2,Cinnoline-4-carboxylic acid,as a common compound, the synthetic route is as follows.

To a solution OF 4- [ (Z)- (4-BROMOPHENYL) (ethoxyimino) methyl]-1- (4-methyl-4- piperidinyl) piperidine (50 mg, 0.12 MMOL), cinnoline-4-carboxylic acid (25mg, 0.14 mmol), Et3N (0.06 mL, 0.43 MMOL) in DMF (3 mL, anhydrous) was added HATU (60mg, 0. 16MMOL) at room temperature. After 16 h the reaction mixture was poured into ice water, and the solid was collected by filtration. The solid was dissolved in CH2CI2, and dried over NA2SO4. Concentration in vacuo, and purification by preparative TLC (CH2CI2-MEOH, 9: 1) afforded the title compound as a light yellow powder. MS: 564 (M+).

The synthetic route of 21905-86-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SCHERING AKTIENGESELLSCHAFT; WO2004/113323; (2004); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.78593-33-6,3-Bromocinnoline,as a common compound, the synthetic route is as follows.

Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6% M.P.: 108 C. (isopropanol)

78593-33-6 3-Bromocinnoline 12678051, acinnoline compound, is more and more widely used in various.

Reference£º
Patent; Sanofi; US4994474; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.875-66-1,Cinnolin-4-ol,as a common compound, the synthetic route is as follows.

Example 20: Synthesis of 1- [4- (5-FLUORO-2-METHOXYPHENYL)-2-HYDROXY-4-METHYL-2- TRIFLUOROMETHYLPENTYL]-LH-CINNOLIN-4-ONE To a suspension of 2- [2- (5-fluoro-2-methoxyphenyl)-2-methylpropyl]-2-trifluoromethyloxirane (216 mg) and cinnolin-4-ol (V. G. Chapoulaud et AL., Tetrahedron, 2000,56, pp. 5499-5507) (216 mg) in anhydrous ethanol (1.2 ML) was added sodium ethoxide (21 wt. % solution in ethanol, 276 PL). After heating at 85C for 16 hours, the reaction mixture was diluted with ethyl acetate, dried over sodium sulfate, filtered, and concentrated in vacuo. The residue was purified by preparative TLC (eluted with 40% ethyl acetate-hexanes) to give the title compound as a pale yellow solid (26 mg), m. p. 122C-123C.

As the paragraph descriping shows that 875-66-1 is playing an increasingly important role.

Reference£º
Patent; BOEHRINGER INGELHEIM PHARMACEUTICALS, INC.; WO2004/63163; (2004); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

21905-86-2, Cinnoline-4-carboxylic acid is a cinnoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

10764] To a stirred solution of N1-cyclopropyl-5-fluo- robenzene-1,2-diamine mt-i (500 mg, 3.01 mmol) in DMF (5 mE) under an inert atmosphere was added cinnoline-4- carboxylic acid (524 mg, 3.01 mmol), HATU (1.71 g, 4.51 mmol) and diisopropylethylamine (1 mE, 6.02 mmol) at 00 C. The reaction mixture was stirred at room temperature for 16 h. Afier consumption of starting material (by TEC), the reaction mixture was diluted with water (20 mE) and extracted with EtOAc (2×20 mE). The combined organic extracts were washed with water (20 mE), dried over anhydrous Na2SO4 and concentrated under reduced pressure to obtain N-(2-(cyclopropylamino)-4-fluorophenyl) cinnoline4-carboxamide (500 mg, crude) as brown solid used in the next step without further purification.10765] EC-MS: m/z 322.9 [M+H] at 2.71 RT (38.30% purity).

21905-86-2 Cinnoline-4-carboxylic acid 89099, acinnoline compound, is more and more widely used in various.

Reference£º
Patent; Viamet Pharmaceuticals (NC), Inc.; Sparks, Steven; Yates, Christopher M.; Shaver, Sammy R.; Hoekstra, William J.; (156 pag.)US2018/185362; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

78593-33-6, 3-Bromocinnoline is a cinnoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6% M.P.: 108 C. (isopropanol)

The synthetic route of 78593-33-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Sanofi; US4957925; (1990); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics