Month: July 2021

Having gained chemical understanding at molecular level, chemistry graduates may choose to apply this knowledge in almost unlimited ways, as it can be used to analyze all matter and therefore our entire environment.318276-74-3. Introduce a common compound, CAS is 318276-74-3, Name is Methyl cinnoline-6-carboxylate, belongs to cinnolinecompound.

A solution of the compound from example 3d) (345 mg; 1.8 mmol.) in anhydrous tetrahydrofuran (20.0 ml_) was cooled to 5 oC for the portionwise addition of solid lithium aluminumhydride (70.0 mg; 1.8 mmol.) and stirred at 5 0C for 1 h. The mixture was quenched by the addition of ethyl acetate (50.0 ml_) then water (5.0 ml_), filtered through a pad of Celite and evaporated. The residue was dissolved in ethyl acetate (50.0 ml.) and treated with manganese dioxide (0.50 g) and stirred at room temperature for 2 h. The mixture was filtered through a pad of Celite and evaporated to afford the title compound (169 mg; 60%) as a brown powder which was used directly in the following step without further purification

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about Methyl cinnoline-6-carboxylate.318276-74-3

Reference：
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/103759; (2007); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system.21905-86-2. Introduce a common compound, CAS is 21905-86-2, Name is Cinnoline-4-carboxylic acid, belongs to cinnolinecompound.

EXAMPLE 2 Potassium Cinnoline-4-carboxylate (2) 5.10 g of (1) was added over 30 minutes to a vigorously stirred solution of 2.02 g of potassium carbonate in 25 ml of water, at room temperature. The resulting mixture was stirred for one hour at room temperature, then treated with charcoal, and after filtration the water was evaporated. The residue was azeotropically distilled with toluene and dried at 70 C. under reduced pressure, to give 2, as a light tan powder, m.p.: above 280 C.

This is the end of this tutorial post, and I hope it has helped your research about 21905-86-2!, 21905-86-2

Reference：
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

New research progress on 78593-33-6 in 2021. 78593-33-6,Chemical research careers are more diverse than they might first appear, as there are many different reasons to conduct research and many possible environments.In an article, Which mentioned a new discovery about78593-33-6 Name is 3-Bromocinnoline.

Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6% M.P.: 108 C. (isopropanol)

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 3-Bromocinnoline is helpful to your research.78593-33-6

Reference：
Patent; Sanofi; US4957925; (1990); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Having gained chemical understanding at molecular level, chemistry graduates may choose to apply this knowledge in almost unlimited ways, as it can be used to analyze all matter and therefore our entire environment.78593-33-6. Introduce a common compound, CAS is 78593-33-6, Name is 3-Bromocinnoline, belongs to cinnolinecompound.

Starting material 1-A (11.8 g, 40 mmol), starting material 1-B (16.7 g, 80 mmol), CuI (3.8 g, 20 mmol), potassium carbonate (11.1 g, 80 mmol), and 1-methyl-1H-imidazole (3.3 g, 40 mmol) were added to 250 ml of toluene, and then, the mixture was refluxed while stirring under a nitrogen atmosphere for 7 days. Then, the reaction mixture was cooled to room temperature, 300 ml of water was added to isolate the organic layer, and the water layer was extracted twice with 250 ml of dichloromethane. The extracted organic layer was stirred with MgSO4 to remove water therefrom, and the organic layer was filtered and evaporated under reduced pressure. The resulting solid was subjected to column chromatography using, as an eluent, dichloromethane and normal hexane to obtain 5.6 g of Intermediate 1-C at the yield of 33%. MS (MALDI-TOF) m/z: 424 [M]+

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3-Bromocinnoline.78593-33-6

Reference：
Patent; SAMSUNG DISPLAY CO., LTD.; Kim, Myeongsuk; Ye, Jimyoung; Yoo, Byeongwook; Cho, Illhun; Kang, Sunwoo; Kim, Sunjae; Jeong, Jaeho; (112 pag.)US2020/99001; (2020); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Chemical engineers work across a number of sectors, processes differ within each of these areas, and are directly involved in the design, development, creation and manufacturing process of chemical products. Introduce a common compound, CAS is 21905-86-2, Name is Cinnoline-4-carboxylic acid, belongs to cinnoline compound. 21905-86-2

10764] To a stirred solution of N1-cyclopropyl-5-fluo- robenzene-1,2-diamine mt-i (500 mg, 3.01 mmol) in DMF (5 mE) under an inert atmosphere was added cinnoline-4- carboxylic acid (524 mg, 3.01 mmol), HATU (1.71 g, 4.51 mmol) and diisopropylethylamine (1 mE, 6.02 mmol) at 00 C. The reaction mixture was stirred at room temperature for 16 h. Afier consumption of starting material (by TEC), the reaction mixture was diluted with water (20 mE) and extracted with EtOAc (2×20 mE). The combined organic extracts were washed with water (20 mE), dried over anhydrous Na2SO4 and concentrated under reduced pressure to obtain N-(2-(cyclopropylamino)-4-fluorophenyl) cinnoline4-carboxamide (500 mg, crude) as brown solid used in the next step without further purification.10765] EC-MS: m/z 322.9 [M+H] at 2.71 RT (38.30% purity).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 21905-86-2, 21905-86-2

Reference：
Patent; Viamet Pharmaceuticals (NC), Inc.; Sparks, Steven; Yates, Christopher M.; Shaver, Sammy R.; Hoekstra, William J.; (156 pag.)US2018/185362; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation. Introduce a common compound, CAS is 78593-33-6, Name is 3-Bromocinnoline, belongs to cinnoline compound. 78593-33-6

Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6% M.P.: 108 C. (isopropanol)

This is the end of this tutorial post, and I hope it has helped your research about 78593-33-6!, 78593-33-6

Reference：
Patent; Sanofi; US5147878; (1992); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Chemical engineers ensure the efficiency and safety of chemical processes, adapt the chemical make-up of products to meet environmental or economic needs, and apply new technologies to improve existing processes. Introduce a common compound, CAS is 78593-33-6, Name is 3-Bromocinnoline, belongs to cinnoline compound. 78593-33-6

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%.

Interested yet? This just the tip of the iceberg, You can reading other blog about 78593-33-6. 78593-33-6

Reference：
Patent; Sanofi; US5017579; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Modeling chemical reactions helps engineers virtually understand the chemistry, optimal size and design of the system, and how it interacts with other physics that may come into play. Introduce a common compound, CAS is 78593-33-6, Name is 3-Bromocinnoline, belongs to cinnoline compound. 78593-33-6

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%.

A reaction mechanism is the microscopic path by which reactants are transformed into products. Each step is an elementary reaction. In the meantime we’ve collected together some recent articles in this area about 78593-33-6 to whet your appetite. Happy reading! 78593-33-6

Reference：
Patent; Sanofi; US5017579; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Researchers are common within chemical engineering and are often tasked with creating and developing new chemical techniques, frequently combining other advanced and emerging scientific areas. Introduce a common compound, CAS is 38024-35-0, Name is 4-Aminocinnoline-3-carboxamide, belongs to cinnoline compound. 38024-35-0

To a suspension of 4-aminocinnoline-3-carboxamide (3.5 g, 18.60 mmol) in DCM (10 ml) was added POCI3 (43.3 ml, 465 mmol) followed by triethylamine (7.78 ml, 55.8 mmol). The mixture was refluxed for 7 h. The reaction was then allowed to cool to 11 and conc, in vacuo. The crude residuewas then carefully treated with saturated aqueous NaHCO3 at 0 C. A precipitate formed which was collected via vacuum filtration. The filter cake washed with water (-i00 ml,), collected, and driedvacuo to provide the title compound as a grey solid 4-aminocinnoiine-3-carbonitriie.

Keep reading other articles of 38024-35-0! Don’t worry, you don’t need a PhD in chemistry to understand the explanations! 38024-35-0

Reference：
Patent; PI INDUSTRIES LTD.; SAXENA, Rohit; PANMAND, Deepak Shankar; JENA, Lalit Kumar; SRIVASTAVA, Khushboo; RAJU, Jella Rama; MANJUNATHA, Sulur G; SAMANTA, Jatin; GARG, Ruchi; AUTKAR, Santosh Shridhar; VENKATESHA, Hagalavadi M; GADAKH, Ramdas Balu; KLAUSENER, Alexander G. M.; POSCHARNY, Konstantin; (219 pag.)WO2018/116072; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

You could be based in a university, combining chemical research with teaching; in a pharmaceutical company, working on developing and trialing new drugs, helping to ensure national healthcare provision keeps pace. Introduce a common compound, CAS is 875-66-1, Name is Cinnolin-4-ol, belongs to cinnoline compound. 875-66-1

a. 4-Chloro-8-nitroquinoline (6a). This intermediate was prepared from 4-chloroquinoline (obtained by treating 4-hydroxyquinoline with [POC13] as [ DESCRIBED BY GOULEY, R. W., ET AL. , J. AMER. CHEM. SOC., 1947, 69, 303-306.4-] Chloroquinoline (10.0 g, 61.3 mmol) was added in small portions to sulfuric acid (45 mL) taking care to maintain the temperature at or below 15 C. Then the solution was cooled and maintained at-15 C during the addition of fuming nitric acid (9 mL). The mixture was allowed to warm to room temperature and stirred for an additional 3 hours. The reaction mix was poured on ice and basified (pH 9) with NH40H. The resulting precipitate was filtered, washed well with water, dried, and recrystallized from methanol to provide 7.5 g of 6a, in 59 % yield; m. p. = [128-129 C] (lit. m. p. = [129-130 C) ; IH] NMR [(CDC13)] [8] 7.67 (d, [1H,] J=4. 5), 7.75 (dd, 1H, J=8. 6 [HZ,] J=7. 6), 8.10 (dd, 1H, J=7. 6, J=1. 3), 8. 48 (dd, 1H,. [J=8.] [6,] J=1.3), 8.94 (d, 1H, J=4. 5); [13C] NMR [(CDC13)] [8] 123.0, 124.4, 126.5, 127.5, 128.3, 140.6, 143.2, 148.7, 152.1.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about Cinnolin-4-ol.875-66-1

Reference：
Patent; RUTGERS, THE STATE UNIVERSITY; LAVOIE, Edmond, J.; RUCHELMAN, Alexander, L.; LIU, Leroy, F.; WO2004/14906; (2004); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics