Day: November 9, 2020

Cinnolin-4-ol, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 875-66-1

a. [4-CHLOROCINNOLINE] (9b). A mixture of 4-hydroxycinnoline (2.0 g, 13.7 mmol), phosphorus oxychloride (1.94 mL, 20.5 mmol), and pyridine (0.33 mL, 4.1 mmol) in [CHLOROBENZENE] (50 mL) was refluxed for 1 hour. Then the mixture was cooled and the solvent evaporated under vacuum, water was added, and the mixture was neutralized with solid sodium bicarbonate and extracted with chloroform (3 x 100 mL), washed with water (3 x 100 mL), dried [(MGS04)] and evaporated under vacuum, giving 1.84 g, in 82 % yield; [MP] [76-77 C] (lit mp 78 [C)] [; IH] NMR [(CDC13)] [8] 7.91 (m, 2H), 8.20 (dd, 1H, [J=6.] 2, [J=2.] 1), 8.57 (dd, 1H, J=6. 6, J=1. 8), 9.34 (s, [1H)] ; [13C NMR (CDCL3) No. ] 123.0, 124.9, 130.2, 131.6, 132.3, 133.8, 134.9, 144.4.

The chemical industry reduces the impact on the environment during synthesis, Cinnolin-4-ol, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; RUTGERS, THE STATE UNIVERSITY; LAVOIE, Edmond, J.; RUCHELMAN, Alexander, L.; LIU, Leroy, F.; WO2004/14906; (2004); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.875-66-1, Cinnolin-4-ol it is a common compound, a new synthetic route is introduced below.875-66-1

a. 4-Chloro-8-nitroquinoline (6a). This intermediate was prepared from 4-chloroquinoline (obtained by treating 4-hydroxyquinoline with [POC13] as [ DESCRIBED BY GOULEY, R. W., ET AL. , J. AMER. CHEM. SOC., 1947, 69, 303-306.4-] Chloroquinoline (10.0 g, 61.3 mmol) was added in small portions to sulfuric acid (45 mL) taking care to maintain the temperature at or below 15 C. Then the solution was cooled and maintained at-15 C during the addition of fuming nitric acid (9 mL). The mixture was allowed to warm to room temperature and stirred for an additional 3 hours. The reaction mix was poured on ice and basified (pH 9) with NH40H. The resulting precipitate was filtered, washed well with water, dried, and recrystallized from methanol to provide 7.5 g of 6a, in 59 % yield; m. p. = [128-129 C] (lit. m. p. = [129-130 C) ; IH] NMR [(CDC13)] [8] 7.67 (d, [1H,] J=4. 5), 7.75 (dd, 1H, J=8. 6 [HZ,] J=7. 6), 8.10 (dd, 1H, J=7. 6, J=1. 3), 8. 48 (dd, 1H,. [J=8.] [6,] J=1.3), 8.94 (d, 1H, J=4. 5); [13C] NMR [(CDC13)] [8] 123.0, 124.4, 126.5, 127.5, 128.3, 140.6, 143.2, 148.7, 152.1.

The chemical industry reduces the impact on the environment during synthesis, Cinnolin-4-ol, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; RUTGERS, THE STATE UNIVERSITY; LAVOIE, Edmond, J.; RUCHELMAN, Alexander, L.; LIU, Leroy, F.; WO2004/14906; (2004); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

3-Bromocinnoline, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 78593-33-6

Starting material 1-A (11.8 g, 40 mmol), starting material 1-B (16.7 g, 80 mmol), CuI (3.8 g, 20 mmol), potassium carbonate (11.1 g, 80 mmol), and 1-methyl-1H-imidazole (3.3 g, 40 mmol) were added to 250 ml of toluene, and then, the mixture was refluxed while stirring under a nitrogen atmosphere for 7 days. Then, the reaction mixture was cooled to room temperature, 300 ml of water was added to isolate the organic layer, and the water layer was extracted twice with 250 ml of dichloromethane. The extracted organic layer was stirred with MgSO4 to remove water therefrom, and the organic layer was filtered and evaporated under reduced pressure. The resulting solid was subjected to column chromatography using, as an eluent, dichloromethane and normal hexane to obtain 5.6 g of Intermediate 1-C at the yield of 33%. MS (MALDI-TOF) m/z: 424 [M]+

The chemical industry reduces the impact on the environment during synthesis, 78593-33-6, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SAMSUNG DISPLAY CO., LTD.; Kim, Myeongsuk; Ye, Jimyoung; Yoo, Byeongwook; Cho, Illhun; Kang, Sunwoo; Kim, Sunjae; Jeong, Jaeho; (112 pag.)US2020/99001; (2020); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Cinnoline-4-carboxylic acid, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 21905-86-2

10764] To a stirred solution of N1-cyclopropyl-5-fluo- robenzene-1,2-diamine mt-i (500 mg, 3.01 mmol) in DMF (5 mE) under an inert atmosphere was added cinnoline-4- carboxylic acid (524 mg, 3.01 mmol), HATU (1.71 g, 4.51 mmol) and diisopropylethylamine (1 mE, 6.02 mmol) at 00 C. The reaction mixture was stirred at room temperature for 16 h. Afier consumption of starting material (by TEC), the reaction mixture was diluted with water (20 mE) and extracted with EtOAc (2×20 mE). The combined organic extracts were washed with water (20 mE), dried over anhydrous Na2SO4 and concentrated under reduced pressure to obtain N-(2-(cyclopropylamino)-4-fluorophenyl) cinnoline4-carboxamide (500 mg, crude) as brown solid used in the next step without further purification.10765] EC-MS: m/z 322.9 [M+H] at 2.71 RT (38.30% purity).

The chemical industry reduces the impact on the environment during synthesis, Cinnoline-4-carboxylic acid, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Viamet Pharmaceuticals (NC), Inc.; Sparks, Steven; Yates, Christopher M.; Shaver, Sammy R.; Hoekstra, William J.; (156 pag.)US2018/185362; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

4-Aminocinnoline-3-carboxamide, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 38024-35-0

To a suspension of 4-aminocinnoline-3-carboxamide (3.5 g, 18.60 mmol) in DCM (10 ml) was added POCI3 (43.3 ml, 465 mmol) followed by triethylamine (7.78 ml, 55.8 mmol). The mixture was refluxed for 7 h. The reaction was then allowed to cool to 11 and conc, in vacuo. The crude residuewas then carefully treated with saturated aqueous NaHCO3 at 0 C. A precipitate formed which was collected via vacuum filtration. The filter cake washed with water (-i00 ml,), collected, and driedvacuo to provide the title compound as a grey solid 4-aminocinnoiine-3-carbonitriie.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 4-Aminocinnoline-3-carboxamide reaction routes.

Reference£º
Patent; PI INDUSTRIES LTD.; SAXENA, Rohit; PANMAND, Deepak Shankar; JENA, Lalit Kumar; SRIVASTAVA, Khushboo; RAJU, Jella Rama; MANJUNATHA, Sulur G; SAMANTA, Jatin; GARG, Ruchi; AUTKAR, Santosh Shridhar; VENKATESHA, Hagalavadi M; GADAKH, Ramdas Balu; KLAUSENER, Alexander G. M.; POSCHARNY, Konstantin; (219 pag.)WO2018/116072; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. 21905-86-2, C9H6N2O2, Here is a downstream synthesis route of the compound. 21905-86-2

A solution of cinnoline-4-carboxylic acid (183 mg, 1.02 mmol) in methylene chloride (20 ml) was reacted with EDCI (195 mg, 1.02 mmol) and HOBt (138 mg, 1.02 mmol) for 20 min and then stirred, together with 4b-amino-9b-hydroxy-7-isopropyl-4b,9b-dihydro-5-oxa-indeno[2,1-a]-inden-10-one (250 mg, 0.85 mmol), overnight at room temperature. After extraction with methylene chloride and water, the organic layer was dried over MgSO4 and concentrated in a vacuum. Purification by column chromatography (ethylacetate:n-hexane=1:1) afforded the title compound as a white solid (290 mg, 63%). [0846] 1H-NMR (300 MHz, CD3OD) delta 1.15 (d, J=6.8 Hz, 6H, CH3), 2.82 (sep, J=6.8 Hz, 1H, CH), 6.69 (s, 1H, ArH), 6.89 (d, J=7.8 Hz, 1H, ArH), 7.45 (d, J=7.9 Hz, 1H, ArH), 7.65 (m, 1H, ArH), 7.858.03 (m, 5H, ArH) 8.42 (d, J=8.0 Hz, 1H, ArH), 8.51 (d, J=8.4 Hz, 1H, ArH), 9.45 (s, 1H, ArH).

The chemical industry reduces the impact on the environment during synthesis, 21905-86-2, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; KATHOLIEKE UNIVERSITEIT LEUVEN K.U. LEUVEN R & D; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; Jung, Young Sik; Lee, Chong Kgo; Kim, Hae Soo; Jeong, Hee Chun; Kim, Pil Ho; Han, Soo Bong; Shin, Jin Soo; Neyts, Johan; Thibaut, Hendrik Jan; US2014/114068; (2014); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

3-Bromocinnoline, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 78593-33-6

Starting material 1-A (11.8 g, 40 mmol), starting material 1-B (16.7 g, 80 mmol), CuI (3.8 g, 20 mmol), potassium carbonate (11.1 g, 80 mmol), and 1-methyl-1H-imidazole (3.3 g, 40 mmol) were added to 250 ml of toluene, and then, the mixture was refluxed while stirring under a nitrogen atmosphere for 7 days. Then, the reaction mixture was cooled to room temperature, 300 ml of water was added to isolate the organic layer, and the water layer was extracted twice with 250 ml of dichloromethane. The extracted organic layer was stirred with MgSO4 to remove water therefrom, and the organic layer was filtered and evaporated under reduced pressure. The resulting solid was subjected to column chromatography using, as an eluent, dichloromethane and normal hexane to obtain 5.6 g of Intermediate 1-C at the yield of 33%. MS (MALDI-TOF) m/z: 424 [M]+

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 3-Bromocinnoline reaction routes.

Reference£º
Patent; SAMSUNG DISPLAY CO., LTD.; Kim, Myeongsuk; Ye, Jimyoung; Yoo, Byeongwook; Cho, Illhun; Kang, Sunwoo; Kim, Sunjae; Jeong, Jaeho; (112 pag.)US2020/99001; (2020); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

3-Bromocinnoline, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 78593-33-6

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50ml of dimethylsulphoxide was stirred and heated at -20 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield 10.2%

The chemical industry reduces the impact on the environment during synthesis, 3-Bromocinnoline, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Sanofi; US4957925; (1990); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Cinnolin-4(1H)-one, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 18514-84-6

Intermediate 2: Preparation of 3-Bromo-l,4-dihydro-4-cinnolinone:Bromine (0.8 ml) in acetic acid (10 ml) was added to a mixture of cinnolin-4- one (1.5 g, 10.27 mmol), sodium acetate (1.51 g, 18.49 mmol) and acetic acid (15 ml) maintained at 100 0C and stirred at that temperature for Ih. The mixture was concentrated under reduced pressure to half the initial volume and poured into water. The precipitated solid was filtered, washed with water and dried under reduced pressure. Yield: 64%. 1H-NMR (delta ppm, CDCl3, 300 MHz): 13.87 (br. s, IH); 8.06 (d, J = 7.8, IH); 7.84-7.80 (m, IH); 7.61 (d, J = 8.7, IH); 7.49 (t, J = 7.8, IH).

The chemical industry reduces the impact on the environment during synthesis, Cinnolin-4(1H)-one, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; GLENMARK PHARMACEUTICALS, S.A.; WO2009/53799; (2009); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

78593-33-6, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 78593-33-6

a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 3-Bromocinnoline reaction routes.

Reference£º
Patent; Sanofi; US5147878; (1992); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics