Day: September 24, 2020

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.875-66-1, Cinnolin-4-ol it is a common compound, a new synthetic route is introduced below.875-66-1

To a suspension of NaH (60% in mineral oil, 0.099 g, 2.46 mmol) in DMF (5 mL) was added cinnolin-4-ol (prepared from 2-aminoacetophenone according to the procedures described in U. S. Patent No. 4,620, 000), 0. 300 g, 2.05 mmol) in DMF (2 mL) dropwise. The reaction mixture was warmed at 40 C and stirred for 30 minutes. After cooling, N-phenyltrifluoromethanesulfonimide (0.880 g, 2.46 mmol) in DMF (2 mL) was added, and the reaction mixture was stirred at room temperature for 1 hour. 1-Boc piperazine (0.765 g, 4.11 mmol) was added to the mixture. The reaction was stirred at 80 C for 4 hours. After cooling, the mixture was partitioned between EtOAc and water. The aqueous phase was extracted with EtOAc. The combined organic layers were washed with water, brine, dried and concentrated. The residue was purified by column chromatography (1: 1 to 1: 3 hexanes/EtOAc) to give 4- Cinnolin-4-yl-piperazine-l-carboxylic acid tert-butyl ester (0.246 g, 38%) as a yellow oil. 1H NMR (CDC13, 400 MHz) 8 8. 91 (s, 1H), 8. 47 (d, J= 8.4 Hz, 1H), 7.97 (d, J= 8. 4 Hz, 1H), 7.80 (t, J= 7.2 Hz, 1H), 7.69 (t, J= 7.2 Hz, 1H), 3.74 (m, 4H), 3. 34 (m, 4H), 1.51 (s, 9H). LCMS (APCI+) tnlz 315 [M+H]’ ; Rt = 2.14 minutes.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Cinnolin-4-ol reaction routes.

Reference£º
Patent; ARRAY BIOPHARMA INC.; WO2005/51304; (2005); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

318276-74-3, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”318276-74-3

A solution of the compound from example 3d) (345 mg; 1.8 mmol.) in anhydrous tetrahydrofuran (20.0 mL) was cooled to 5 oC for the portionwise addition of solid lithium aluminumhydride (70.0 mg; 1.8 mmol.) and stirred at 5 0C for 1 h. The mixture was quenched by the addition of ethyl acetate (50.0 mL) then water (5.0 mL), filtered through a pad of Celite and evaporated. The residue was dissolved in ethyl acetate (50.0 mL) and treated with manganese dioxide (0.50 g) and stirred at room temperature for 2 h. The mixture was filtered through a pad of Celite and evaporated to afford the title EPO compound (169 mg; 60%) as a brown powder which was used directly in the following step without further purification,

The chemical industry reduces the impact on the environment during synthesis, 318276-74-3, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/38331; (2007); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Methyl cinnoline-6-carboxylate, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”318276-74-3

A solution of the compound from example 3d) (345 mg; 1.8 mmol.) in anhydrous tetrahydrofuran (20.0 ml_) was cooled to 5 oC for the portionwise addition of solid lithium aluminumhydride (70.0 mg; 1.8 mmol.) and stirred at 5 0C for 1 h. The mixture was quenched by the addition of ethyl acetate (50.0 ml_) then water (5.0 ml_), filtered through a pad of Celite and evaporated. The residue was dissolved in ethyl acetate (50.0 ml.) and treated with manganese dioxide (0.50 g) and stirred at room temperature for 2 h. The mixture was filtered through a pad of Celite and evaporated to afford the title compound (169 mg; 60%) as a brown powder which was used directly in the following step without further purification

The chemical industry reduces the impact on the environment during synthesis, Methyl cinnoline-6-carboxylate, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/103759; (2007); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.21905-86-2, Cinnoline-4-carboxylic acid it is a common compound, a new synthetic route is introduced below.21905-86-2

EXAMPLE 2 Potassium Cinnoline-4-carboxylate (2) 5.10 g of (1) was added over 30 minutes to a vigorously stirred solution of 2.02 g of potassium carbonate in 25 ml of water, at room temperature. The resulting mixture was stirred for one hour at room temperature, then treated with charcoal, and after filtration the water was evaporated. The residue was azeotropically distilled with toluene and dried at 70 C. under reduced pressure, to give 2, as a light tan powder, m.p.: above 280 C.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Cinnoline-4-carboxylic acid reaction routes.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Cinnolin-4-ol, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”875-66-1

a. 4-Chloro-8-nitroquinoline (6a). This intermediate was prepared from 4-chloroquinoline (obtained by treating 4-hydroxyquinoline with [POC13] as [ DESCRIBED BY GOULEY, R. W., ET AL. , J. AMER. CHEM. SOC., 1947, 69, 303-306.4-] Chloroquinoline (10.0 g, 61.3 mmol) was added in small portions to sulfuric acid (45 mL) taking care to maintain the temperature at or below 15 C. Then the solution was cooled and maintained at-15 C during the addition of fuming nitric acid (9 mL). The mixture was allowed to warm to room temperature and stirred for an additional 3 hours. The reaction mix was poured on ice and basified (pH 9) with NH40H. The resulting precipitate was filtered, washed well with water, dried, and recrystallized from methanol to provide 7.5 g of 6a, in 59 % yield; m. p. = [128-129 C] (lit. m. p. = [129-130 C) ; IH] NMR [(CDC13)] [8] 7.67 (d, [1H,] J=4. 5), 7.75 (dd, 1H, J=8. 6 [HZ,] J=7. 6), 8.10 (dd, 1H, J=7. 6, J=1. 3), 8. 48 (dd, 1H,. [J=8.] [6,] J=1.3), 8.94 (d, 1H, J=4. 5); [13C] NMR [(CDC13)] [8] 123.0, 124.4, 126.5, 127.5, 128.3, 140.6, 143.2, 148.7, 152.1.

The chemical industry reduces the impact on the environment during synthesis, Cinnolin-4-ol, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; RUTGERS, THE STATE UNIVERSITY; LAVOIE, Edmond, J.; RUCHELMAN, Alexander, L.; LIU, Leroy, F.; WO2004/14906; (2004); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

21905-86-2, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”21905-86-2

EXAMPLE 2 Potassium Cinnoline-4-carboxylate (2) 5.10 g of (1) was added over 30 minutes to a vigorously stirred solution of 2.02 g of potassium carbonate in 25 ml of water, at room temperature. The resulting mixture was stirred for one hour at room temperature, then treated with charcoal, and after filtration the water was evaporated. The residue was azeotropically distilled with toluene and dried at 70 C. under reduced pressure, to give 2, as a light tan powder, m.p.: above 280 C., 21905-86-2

The chemical industry reduces the impact on the environment during synthesis, 21905-86-2, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Methyl cinnoline-6-carboxylate, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”318276-74-3

A solution of the compound from example 3d) (345 mg; 1.8 mmol.) in anhydrous tetrahydrofuran (20.0 ml_) was cooled to 5 oC for the portionwise addition of solid lithium aluminumhydride (70.0 mg; 1.8 mmol.) and stirred at 5 0C for 1 h. The mixture was quenched by the addition of ethyl acetate (50.0 ml_) then water (5.0 ml_), filtered through a pad of Celite and evaporated. The residue was dissolved in ethyl acetate (50.0 ml.) and treated with manganese dioxide (0.50 g) and stirred at room temperature for 2 h. The mixture was filtered through a pad of Celite and evaporated to afford the title compound (169 mg; 60%) as a brown powder which was used directly in the following step without further purification, 318276-74-3

The chemical industry reduces the impact on the environment during synthesis, Methyl cinnoline-6-carboxylate, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/103759; (2007); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

78593-33-6, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”78593-33-6

Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6%. M.P.: 108 C. (isopropanol).

The chemical industry reduces the impact on the environment during synthesis, 78593-33-6, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Sanofi; US5017579; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.78593-33-6, 3-Bromocinnoline it is a common compound, a new synthetic route is introduced below.78593-33-6

78593-33-6, a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 3-Bromocinnoline reaction routes.

Reference£º
Patent; Sanofi; US5147878; (1992); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

78593-33-6, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”78593-33-6

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50ml of dimethylsulphoxide was stirred and heated at -20 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield 10.2%

The chemical industry reduces the impact on the environment during synthesis, 3-Bromocinnoline, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Sanofi; US4957925; (1990); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics